|
The E4 Series chassis is a high performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E4 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The E4 provides
for two externally accessible 5-1/4
inch and two 3-1/2 inch drive bays.
In addition, three 3-1/2 inch drives
can be installed internally.
With the EATX motherboard
and ample drive capacity, this system
is ideal for server type applications.
|
The chassis is
cooled by three 80mm 42CFM ball bearing
fans. Air flow is in through a front
mounted air filter. Mid chassis mounted
fans pull filtered cooling air over
the drives.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed.
The E4 Chassis
provides for mounting a standard ATX
motherboard up to 9.6 x 12-inches. Two
plug-in cards can be installed using
the included riser card. Additionally,
several riser card options are available.
The chassis provides
for rear mounting a 2U style power supply.
Redundant supplies are optionally available.
DC powered suppliesare available including
-48VDC for central office installations.
|
