Home >D3 Series Chassis

D3 Series 3U 3U x 25.6 inch depth design Four hot swap SCA-2 SCSI drives Two 5-1/4 inch front drive bays Two 3-1/2 inch front drive bays One 3-1/2 inch internal drive Three 90mm cooling fans Two 40mm exhaust fans Thermal management alarm board EATX motherboard Seven full-length I/O card slots Various power options Custom paint and logo available

Additional Photos

The D3 Series chassis is a high performance design in a low cost 3U rackmount enclosure. Feature rich, the D3 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for high density disk intensive web server, back office server, firewall, proxy server and VPN gateway applications including collocation. The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis. There is a huge! amount of drive space with the four hot swap drives, two front accessible 5-1/4" drive bays, two 3-1/2 inch bays and one internal 3-1/2 inch bay. Hot swap raid plus CD and tape is an evident configuration.

A door covers and protects the drives. Accessible behind the door is the power and reset switches. Visible through the door are the power, drive activity and alarm LED's. Cooling is provided by three 90mm 51CFM hot swap fans blowing through the chassis plus two 40mm exhaust fans. A door mounted air filter provides clean cooling air and easy filter access. Fan operation is monitored by the alarm board. The D3 Chassis provides for mounting a standard EATX motherboard up to 12 x 13 inches Seven full-length plug-in cards can be installed. Power is provided by a 2U style power supply. Several power options are available including DC operation.

Downloadable PDF files

D3 Datasheet

D3 (EATX) Drawing

Highlights

Dimensions

19" (wide) x 3U (5.20") (high) x 25.6" (deep)

Drive Capacity

Four hot swap 3-1/2 inch drives
Two 5-1/4 inch drives - front accessible
Two 3-1/2 inch drive - front accessible
One 3-1/2 inch drive - internal

Front Panel Controls

Power switch -black momentary pushbutton with 2 position .100 header for board connection
Reset switch - black pushbutton with 2 position .100 header for board connection
Power LED - green with 3 position .100 header for board connection
Drive activity - red with 2 position .100 header for board connection
Fan failure - green connected to alarm board

Switch and LED connectors are labeled at the connector end.

Rear Panel Details

7 Plug-in card slot
ATX I/O Shield
One DB25 connector knockout
One SCSI connector knockout
Alarm board terminal block

Cooling

Three 90mm 51CFM fans
Two 40mm 7CFM exhaust fans
Positive chassis pressure

Thermal Management Board

Monitors the following chassis parameters. Audible alarm sounded on system failure. Rear panel mounted terminal block for NO/NC contact closure for external alarm.

• Fan operation
• Chassis over-temperature settable for 40, 50, 60 deg C alarm point
• Two remote chassis temperature probes.
• Power supply operation
• Front panel indication of system alarm status

Power Supply

Rear Mount 2U style
AC Supply - Zippy P2U or P2G form factor
DC Supply - D2U form factor, 48VDC only available
Power supply not included.

Motherboard Mounting

Standard 12 x 13 inch EATX motherboard
Motherboard adapter plate accommodates any motherboard

Plug-in I/O Cards

Accommodates seven plug-in I/O cards

Integration Services Chassis Plans is more than a chassis supplier. We offer a complete product line including the latest motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%.